Pots and Vases

Pick a pot and set it on the floor or a table. Nursery pots, planters, baskets, bowls and vases in real trade sizes, with their rims, ribs, saucers, stands and hangers, and the volume they hold worked out.

Style a room

32 pots and vases to start from

Pots, planters, baskets, stands, hanging pots and vases. Each one is a starting point; every part can be changed once it is placed.

  • Speckled cylinder on an oak cradle in 3D

    Speckled cylinder on an oak cradle

    Cylinder in speckled stoneware, on a cradle stand. 5L trade size.

  • White cylinder on a walnut cradle in 3D

    White cylinder on a walnut cradle

    Cylinder in white stoneware, on a cradle stand. 7L trade size.

  • Teak cradle, black stoneware in 3D

    Teak cradle, black stoneware

    Cylinder in black stoneware, on a cradle stand. 10L trade size.

  • Terracotta nursery pot in 3D

    Terracotta nursery pot

    Nursery pot in terracotta. 3L trade size.

  • Aged terracotta, saucer in 3D

    Aged terracotta, saucer

    Tapered in aged terracotta. 7L trade size.

  • Ribbed cream cylinder in 3D

    Ribbed cream cylinder

    Cylinder in cream stoneware. 5L trade size.

  • Fluted sand planter in 3D

    Fluted sand planter

    Tapered in sand stoneware. 10L trade size.

  • Matte charcoal cylinder in 3D

    Matte charcoal cylinder

    Cylinder in black stoneware. 15L trade size.

  • Black concrete planter in 3D

    Black concrete planter

    Tapered in black concrete. 20L trade size.

  • Concrete cube planter in 3D

    Concrete cube planter

    Square in concrete. 15L trade size.

  • Sage stoneware bowl in 3D

    Sage stoneware bowl

    Bowl in sage stoneware. 7L trade size.

  • Travertine footed bowl in 3D

    Travertine footed bowl

    Footed in travertine. 10L trade size.

  • Window trough, terracotta in 3D

    Window trough, terracotta

    Trough in terracotta. 10L trade size.

  • Egg planter, rust in 3D

    Egg planter, rust

    Egg planter in rust stoneware. 15L trade size.

  • Fibreclay bell planter in 3D

    Fibreclay bell planter

    Bell planter in fibreclay. 25L trade size.

  • Rope-coil basket in 3D

    Rope-coil basket

    Basket in jute. 15L trade size.

  • Seagrass basket planter in 3D

    Seagrass basket planter

    Basket in seagrass. 20L trade size.

  • Rattan cachepot in 3D

    Rattan cachepot

    Cachepot in rattan. 10L trade size.

  • White pot on a wooden tripod in 3D

    White pot on a wooden tripod

    Cylinder in white stoneware, on a tripod wood stand. 5L trade size.

  • Basket on a brass ring stand in 3D

    Basket on a brass ring stand

    Basket in jute, on a ring stand. 10L trade size.

  • Hairpin plant stand in 3D

    Hairpin plant stand

    Cylinder in cream stoneware, on a hairpin stand. 5L trade size.

  • Oak plinth in 3D

    Oak plinth

    Cylinder in white porcelain, on a plinth stand. 10L trade size.

  • Hanging pot, macramé in 3D

    Hanging pot, macramé

    Hanging in cream stoneware, hanging from the ceiling. 3L trade size.

  • Hanging pot, leather cord in 3D

    Hanging pot, leather cord

    Hanging in black stoneware, hanging from the ceiling. 2L trade size.

  • Speckled bud vase in 3D

    Speckled bud vase

    Bud vase in speckled stoneware. 1L trade size.

  • Tall bottle vase, matte cream in 3D

    Tall bottle vase, matte cream

    Bottle in cream stoneware. 2L trade size.

  • Flared vase, smoked glass in 3D

    Flared vase, smoked glass

    Flared vase in smoked glass. 3L trade size.

  • Cylinder vase, clear glass in 3D

    Cylinder vase, clear glass

    Cylinder vase in clear glass. 2L trade size.

  • Ginger jar, white porcelain in 3D

    Ginger jar, white porcelain

    Ginger jar in white porcelain. 5L trade size.

  • Sage urn in 3D

    Sage urn

    Urn in sage stoneware. 7L trade size.

  • Black carafe vase in 3D

    Black carafe vase

    Carafe in black stoneware. 2L trade size.

  • Hexagonal sand vase in 3D

    Hexagonal sand vase

    Cylinder vase in sand stoneware. 3L trade size.

Every property, and what it does

Select a pot and these are its rows: what it measures first, then its Design panel, group by group. A field shows when it applies, so a ribbed pot has its rib depth and a smooth one does not.

Measured

Read from the pot as it is.

FieldWhat it doesValues
Overall heightThe height of the whole piece, stand or saucer included.Millimetres
Rim heightWhere the rim sits above the floor.Millimetres
WidthThe widest point of the pot.Millimetres
HoldsHow much the pot holds.Litres

Design

Which design the pot carries.

FieldWhat it doesValues
PresetReplaces the pot's design with another, keeping where it stands.The 32 presets and your saved designs
Fit the stand to the potWhen the pot does not sit on its stand, says why and sizes the stand to it.One click

Form

The kind of pot, its trade size and its proportions.

FieldWhat it doesValues
FormPlanters are open-topped; vases carry a neck above the belly.Nursery pot, Cylinder, Tapered, Bowl, Egg planter, Trough, Square, Bell planter, Footed, Basket, Hanging, Cachepot, Bud vase, Bottle, Flared vase, Cylinder vase, Ginger jar, Urn, Carafe; default Cylinder
Trade sizeThe sizes pots are actually sold in. Choose "custom" to set the dimensions directly.Custom, P9, 1L, 2L, 3L, 4L, 5L, 7L, 10L, 15L, 20L, 25L, 30L, 40L; default 5L
HeightHow tall the pot is.40 to 900 mm; default 225 mm
Rim diameterWidth across the rim.40 to 900 mm; default 280 mm
Base diameterWidth across the base.30 to 800 mm; default 170 mm
BellyWidest point of the body, as a percentage of the rim diameter.50 to 300%; default 100%; advanced
Belly height0 keeps the form's own proportion.0 to 100%; default 0%; advanced
NeckNarrowest point above the belly, as a percentage of the rim. 0 keeps the form's own.0 to 100%; default 0%; advanced

Profile

The body curve, base, rim and foot.

FieldWhat it doesValues
Body curveThe shape of the body between base and rim; Form follows the chosen form.Form, Straight, Convex, Concave, S-curve, Stepped; default Form
BaseA rounded base is what lets a pot wedge in a cradle stand.Form, Flat, Rounded, Soft, Domed; default Form
Base rollHow far up the pot the base roll climbs. 0 keeps the form's own.0 to 90%; default 0%; advanced
RimHow the rim is finished.Plain, Rolled, Flared, Squared, Banded; default Plain
Wall at the rimThe visible band across the top. A pot with no rim thickness reads as paper.3 to 20 mm; default 8 mm
Band depthDepth of a banded rim.4 to 90 mm; default 22 mm
Wall taperHow much thicker the wall is at the foot. A constant wall reads as moulded.0 to 200%; default 60%; advanced
FootA pot stands on a ring, not on its whole underside. The shadow line under it is what seats the pot on a floor.None, Ring, Pedestal; default Ring
Foot heightHeight of the foot under the pot.2 to 90 mm; default 7 mm
Foot insetHow far the foot sits in from the edge.3 to 80 mm; default 14 mm; advanced

Surface

The outline from above, and ribs, flutes or weave on the surface.

FieldWhat it doesValues
SectionThe pot's outline from above.Round, Square, Hexagon, Octagon, Oval; default Round
Corner roundingHow rounded the corners of a square or many sided pot are.0 to 100%; default 35%
Oval ratioHow narrow an oval pot is against its width.25 to 100%; default 70%
RibsHow many raised ribs run up the pot. Zero leaves it smooth.0 to 60; default 0
Rib depthHow far each rib stands out.0.5 to 14 mm; default 3 mm
Rib profileThe shape of each rib.Round, V, Flat; default Round
FlutesHow many grooves run up the pot. Zero leaves it smooth.0 to 24; default 0; advanced
Flute depthHow deep each groove is.1 to 24 mm; default 6 mm; advanced
WeaveA basket's silhouette is visibly bumpy against a wall, so the weave is geometry rather than a texture.None, Jute, Rattan, Seagrass, Wicker, Rope coil; default None
Weave pitchThe spacing of a woven surface.8 to 60 mm; default 22 mm
Weave reliefHow much a woven surface stands out.1 to 18 mm; default 5 mm

Saucer

A saucer under the pot.

FieldWhat it doesValues
SaucerNo saucer, one made with the pot, or a separate one under it.None, Attached, Separate; default None
Saucer oversizeHow much wider the saucer is than the pot.0 to 60%; default 12%
Saucer heightHow tall the saucer is.8 to 90 mm; default 22 mm

Stand

A stand to lift the pot off the floor.

FieldWhat it doesValues
StandA cradle holds the pot inside its frame, the pot descends through the rails rather than sitting on top.None, Cradle, Tripod wood, Tripod metal, Hairpin, Ring, Plinth, X frame, Stepped; default None
Stand heightFloor to the bearing surface, not to the top of the pot.80 to 1100 mm; default 420 mm
LegsThree or four legs on the stand.3 to 4; default 4
Leg diameterThickness of each stand leg.8 to 70 mm; default 24 mm
SplayHow far the stand legs spread at the floor.0 to 220 mm; default 45 mm
Legs above the crossHow far the legs rise past the X. They cradle the pot's lower sides and stop it sliding off, so this is structural, not a detail.0 to 280 mm; default 110 mm
Rail sectionThickness of the stand's rails.8 to 50 mm; default 20 mm
OpeningClear width the pot drops through. 0 fits it to the pot automatically.0 to 500 mm; default 0 mm
StretcherThe brace between the stand legs.None, Square, X, H; default Square; advanced
Stretcher heightHow high the brace sits on the legs.5 to 90%; default 35%; advanced

Hanging

Hanging the pot instead of standing it.

FieldWhat it doesValues
HangHangs the pot from the ceiling or a hook instead of standing it.None, Ceiling, Hook; default None
DropHow far the pot hangs below its fixing.100 to 2000 mm; default 600 mm
HangerWhat the pot hangs from.Cord, Macrame, Leather, Chain; default Cord

Materials

The finish of each part.

FieldWhat it doesValues
PotThe finish of the pot.Terracotta, Aged terracotta, White stoneware, Cream stoneware, Sand stoneware, Speckled stoneware, Black stoneware, Sage stoneware, Rust stoneware, White porcelain, Concrete, Black concrete, Fibreclay, Travertine, Jute, Rattan, Seagrass, Water hyacinth, Black metal, Brass, Copper, Plastic nursery, Plastic white, Clear glass, Smoked glass; default Speckled stoneware
RimThe finish of the rim; Match keeps the pot's.Match, Terracotta, Aged terracotta, White stoneware, Cream stoneware, Sand stoneware, Speckled stoneware, Black stoneware, Sage stoneware, Rust stoneware, White porcelain, Concrete, Black concrete, Fibreclay, Travertine, Oak, Walnut, Teak, Pine, Bamboo, Black stained wood, Jute, Rattan, Seagrass, Water hyacinth, Black metal, Brass, Copper, Plastic nursery, Plastic white, Clear glass, Smoked glass; default Match
SaucerThe finish of the saucer; Match keeps the pot's.Match, Terracotta, Aged terracotta, White stoneware, Cream stoneware, Sand stoneware, Speckled stoneware, Black stoneware, Sage stoneware, Rust stoneware, White porcelain, Concrete, Black concrete, Fibreclay, Travertine, Oak, Walnut, Teak, Pine, Bamboo, Black stained wood, Jute, Rattan, Seagrass, Water hyacinth, Black metal, Brass, Copper, Plastic nursery, Plastic white, Clear glass, Smoked glass; default Match
StandThe finish of the stand.Terracotta, Aged terracotta, White stoneware, Cream stoneware, Sand stoneware, Speckled stoneware, Black stoneware, Sage stoneware, Rust stoneware, White porcelain, Concrete, Black concrete, Fibreclay, Travertine, Oak, Walnut, Teak, Pine, Bamboo, Black stained wood, Jute, Rattan, Seagrass, Water hyacinth, Black metal, Brass, Copper, Plastic nursery, Plastic white, Clear glass, Smoked glass; default Oak
HangerThe finish of the hanger.Terracotta, Aged terracotta, White stoneware, Cream stoneware, Sand stoneware, Speckled stoneware, Black stoneware, Sage stoneware, Rust stoneware, White porcelain, Concrete, Black concrete, Fibreclay, Travertine, Oak, Walnut, Teak, Pine, Bamboo, Black stained wood, Jute, Rattan, Seagrass, Water hyacinth, Black metal, Brass, Copper, Plastic nursery, Plastic white, Clear glass, Smoked glass; default Jute

How the Pots tool works

  1. Open Pots and vases

    In the editor, open Furnish and choose Pots and vases, or type POTTERY (POT). The presets open.

  2. Set it down

    Pick a pot, then click where it goes: on the floor, or on a table or shelf.

  3. Shape it

    Its Design panel changes the form, size, rim, surface, saucer, stand and finishes, and reads what it holds.

  4. Plant it

    For a plant in a pot, use Indoor plants: the same pot, with one of 43 species growing in it.

Pot questions, answered.

What can I make?

Nursery pots, cylinders, tapered pots, bowls, eggs, troughs, square and bell planters, baskets, cachepots, hanging pots, and vases from bud vases to ginger jars, urns and carafes.

Are the sizes real?

Yes. A pot can take a trade size from P9 to 40 litres, and its panel reads how much it holds.

Can a pot have a stand or hang?

Yes. Stands come as cradles, tripods, hairpins, rings, plinths, X frames and stepped stands; a pot can also hang from the ceiling or a hook on a cord, macrame, leather or chain.

Can a pot stand on a table?

Yes. Click a table or shelf and it sits on its top.

Read on